Find Similar Products Like Brother 3 4 Inch X 26 2 Feet Black On at Amazon
|
Here’s a bestloved tradition of our family in outdoor Halloween decor: RING OF GHOSTS Materials: 3 Twin-sized Sheets 3 Four foot lengths of flexible 1/2 inch PVC Piping, Wooden Stakes or Dowels 3 Small White Plastic Garbage Bags Masking Tape Newspaper String or Twist Ties Black Marker (optional) Instructions: 1. First, determine a good emplacement for your ghost gathering. Find a wide open area, or you may determine to group them around a tree or light pole. 2. To make the ghosts’ heads, crumple up newspaper and stuff the three little plastic trash bags to the desired size. 3. Stick one of the PVC pipes into one of the bags and wrap the neck with masking tape to secure. Repeat for the other ghosts. 5. Cover each ghost head with a sheet, gathering with string or a twist tie beneath each head. The head ought to be in the middle of the sheet, so the outer edges may be attached to the neighboring ghosts. You may make taller or shorter ghosts, but you ought to adjust the size of sheet you use to accommodate. Our ghosts will be just under 4 feet tall. 4. Push the PVC piping into the ground in a circular formation when it comes to 1-2 feet apart. The sheets must touch the ground and cover up the support. You may likewise use wooden stakes or dowels, but your ghosts won’t have as much motion as they will with the PVC piping. 6. Finally, knot the ends of the sheets together to give the impression the ghosts are keeping hands. Because the PVC is flexible, your ghosts will now bob and sway in the wind! 7. If desired, make Casper-like faces on the sheets with black marker. We have 3 children, so we always make 3 ghosts, but you may connect as a great deal of ghosts as you wish! They’ll look like they’re playing a spooky game of “ring-around-the-rosy”! Click here to view our Ring of Ghosts FLAGPOLE SPOOKS These spooky decorations are easy if you have an angled flagpole attached to the front of your house. Scary Flagpole Ghost: Hang a “Scream” style mask off the end of the flagpole. Tie a white sheet or a generous length of white tulle around and behind the mask. This scary creature will appear to be flying as his white garment flutters in the wind. Flagpole Frankenstein: Hang a Frankenstein mask off the end of the flagpole. Tie a dark colored trash bag tied behind it. Shredding the trash bag around the edges will add to the spooky effect. Flagpole Witch: Hang a witch mask off the end of the flagpole. Attach a witch hat to the mask, then tie a dark colored trash bag tied behind it. Shred the trash bag to make the witch’s robe flap in the wind.
15 of 15 people found the following review helpful. 3 of 3 people found the following review helpful. 1 of 1 people found the following review helpful. We finally realized that to remove the backing you need to lift the backing horizontally and in the middle, as there is a perforation which lifts up quite easily on the back of the tape. You fold the tape in the middle and lift the backing from the center of the tape (non-printed side) lifting half way up or down and you can then remove the backing. (You are folding in half the long part of the tape.)When you fold the back side in the middle, you will see the perforation in the middle of the tape. Hope this helps with removing the backing and exposing the adhesive. We look forward to the tapes resisting UV Rays as they are placed on metal plant markers. |
tip for saving tape
Good for Plant Identification